• Thorworld offers four types of Heavy Duty Dock Bumpers including three types of moulded bumpers and a hollow "D" section bumper. The Bumpers are shown in fig. 1 (default image).
• If additional thickness is required refer to our Dock Bumper Supports.
• Note:
• Bumpers with the suffix "-S" featured squared sides, rather than the typical taper.
  

Type 1: L Shaped Dock Bumpers

• These bumpers, provide protection to 457mm lengths, in both horizontal and vertical planes in an 'L' shape.
• Ideal when a wide range of protection is required.
  
• Attached by three 16mm diameter fixings.

Type 2: Rectangular Bumpers

• Available in four sizes and in thickness of 100mm or 150mm.
• Standard units have angled edges for improved appearance.
• Available with square edges to allow bumpers to be made up into long runs without gaps.
  
• Two holes per bumper, fixings 16mm diameter.

Type 3: Rectangular Narrow Width Bumpers

• This bumper can be used in many situations, but they are particularly suited to mini dock levellers.
  
• Available in five lengths.
• Fitted by 12mm diameter fixings, fixing holes are incorporated.

Type 4: Extruded D Section Bumper

• Can be provided in lengths up to 3,000mm.
• Can be assembled end to end for long runs.
• Can be provided with mitred ends for corners if required.
• Holes can be incorporated for 12mm fixings or bumpers can be fitted with an optional fixing strip through the centre if required.

Type 14: T Shaped Dock Bumpers

• These bumpers, provide protection to 554mm lengths, in both horizontal and vertical planes in a 'T' shape.
• Ideal when a wide range of protection is required.
• Attached by three 16mm diameter fixings.